Boiler Bleed Valve

Your burner is air locked – but when you have a BoilerBleed fitted, a simple twist of the hand will release the air from the oil pump and get your oil flowing again!! The unique Boiler Bleed tool allows you to bleed your own boiler and save on the plumbing costs! You'll be guaranteed a lifetime of air-free pipes. It is made of a mild steel - 3 inches in length and a half inch wide and suitable for all types of domestic oil burners. Fitting Instructions: 1. Shut off both the oil supply and the electrical supply to the boiler 2. Access the boiler workings, and if fitted remove the boiler shroud 3. Use an hexagonal key to remove the ¾” plug from the oil burner pump 4. Some oil burners are supplied with an oil bleed stern. If this is the case, remove it an replace with the Bleed valve 5. Firmly screw the valve into the now exposed threaded orifice 6. Place an oil collecting container under the valve 7. Restore the oil supply and electrical supply to the boiler 8. Start the boiler so that the oil flow to the burner commences 9. Push the valve plunger until any air is expelled and the oil flows freely 10. Pour any collected oil back into the oil tank 11. If the fitted bleed valve prevents the burner shroud or boiler casing from being replaced, shut off both the oil supply and electrical supply to the boiler, remove the valve and replace the original 3/4” plug. 12. The oil and electrical supply can now be restored and the boiler used as normal

• As seen on Dragons Den. Boilerbleed is a simple device which allows you to bleed an oil boiler in seconds. Save on the expense of a plumber with this simple to use device. Comes complete with fitting instructions..