Olson Saw FB14580DB 1/4 by 0.025 by 80-Inch HEFB Band 6 TPI Skip Saw Blade, Silver

Met all my expectations. Great company!!!

I ordered 1/4 in 6 tooth per in. Blades. I received 1/8 in 14 tooth per in blades I really like Olsen blades above any other brand

The media could not be loaded.  Good value. I was able to easily resaw a pine 2x4 and cut smooth curves. The weld looks ok and the teeth are nice and sharp. I cannot comment on the longevity or durability as of yet but I’m happy with this purchase.

My 20 year old Craftsman 12" bandsaw was not performing and the dull blade seemed the culprit. I installed the Olson 1/4inch 6 TPI blade (80 inch). The saw performed wonderfully even though I only did a very basic reset of the guides. Tracking was my biggest issue with the old blade and this new blade did an impressive job following both straight and curved cuts. I tried a 5 inch dried Maple log section for a quick resaw test...impressive cut, straight and fast! (yes, I know a wider blade would be best for resaw, I just wanted to see how the blade would do in thick material.) I'll be buying a few more Olson blades and get my bandsaw back in service!

I have an old Craftsman 12 inch band saw that I purchased in 1968 and I have been using it at least once a week ever since. I have gone through a lot of blades with this old saw and I can honestly say that the Olson blades without fail, cut smoother and last longer than any other blades that I have ever purchased. My favorite is the 1/4 inch skip tooth blade for all around use. This blade cuts fast even in thick material and allows me to easily follow the intended line of cut very closely without wandering even on tight curves. It takes a minimum of trim and sanding to finish the cut edge as blade leaves a relatively smooth edge. I even cut 3/4 inch thick aluminum bar stock with these blades on occasion. I have tried a variety of other blade but I always come back to Olson for quality and reliability.

I was cutting some thick hardwood and they seen to track well and cut well. I had a 1/2 inch saw which I was using for some straight cuts, but needed some tighter radius cuts so got this one. It worked well on the curves and well on the straight cuts.

In the past I have used Craftsman blades on this old Sears band saw I have and I always thought it was because I cut exotic hardwoods that they didn't last - we will have to see how these hold up long term, but I put this blade on and put it to work right away on some bowl blanks I needed cut. The first one was bubinga wood and the second was Jatoba, both are hard and dense. But that did not matter to this blade, it cut like butter, no burning and smooth finish.

good seller

Very little set to the teeth. Ok for pine or very soft wood but not hard wood

Fit my old 12” Craftsman perfectly. Cuts great.

Good sharp teeth. Should have ordered 4 too for resaw.

works well so far. no issues with the blades, delivery or anything. will try them for another size as well

reçu rapidement , elle fonctionne très bien. Merci