Rough Country 2.5-3" Lift Leveling Kit for 2007-2021 Toyota Tundra - 87000

Quality lift components and perfect fit on my 2021

I installed (local shop actually installed) this on my 2018 Toyota Tundra Limited 4x4. Initially, I told them to just put the 2.5" onto the front (no shims) and leave the back alone. After doing the front, they said it was doing the, "Carolina Squat" (truck looked like it was hauling lead in the back). They added the 1.5" blocks in the back and it was level, and looked exactly how I wanted it.You MUST also do a 4-wheel alignment after installation. The original tires are almost done. I'm probably going up one size for the replacements to a 285/60/R20 tire now that the wheel well has been enlarged.See photos after the installation. Very happy.

Installed these at work on our lift we use for our fleet vehicles. Took me about 8-10 hrs. Could have been quicker but it was a learning experience and some stuff took longer than it needed to mostly on my end. Only complaint is it does not come with bracket extensions for the back, had a guy at work make me some out of some scrap machine steel we had. Took about two hrs for the bump stops because of a little rust, pipe wrench and a lot of wtf the toyota.

The only dislike was instructions weren’t clear and there was absolutely none for the rear no notes nothing and hardware was all In one bag with no label but got it figured out lost a little ride quality but so far it’s holding up nice

Kit was pretty straight forward however, the strut tower would not go back in without grinding some of my lower control arm away to make clearance so it wouldn't rub.I wouldn't recommend

Where do I start…Well I purchased this kit back in mid October.Had everything laid out and made sure I had the correct number of bolts/nuts/washers etcThe instructions that come with this kit aren’t the best. But if you have done one before you get the idea.I took my front suspension apart and went to install spacer. The picture is the bolt and nut that are supplied with the kit. This is as far as the nut would screw onto the bolt. So my truck is apart and I can’t install the kit due to not having the correct nuts. Went to my local Lowes to try and find the correct nuts so I could wrap this project up. I took the old nut and bolt with me. Problem was the bolt and nut had a different thread pitch. They didn’t have what I needed in stock. I needed my truck the next day so went home and put it all pack together and contacted RC. They immediately sent me an entirely new kit. Great! Top notch service or so I thought..I waited a few days and the kit came in. Same exact issue… contacted RC again. Told them they must have a bad patch with incorrect hardware and told them exactly what the problem was.They said they would reach out to quality control and let me know. 2 days later I had to reach out and ask if they had heard anything. The only reply was I’m sending you a new bag of hardware. No apology for not getting back to me or anything. So waited a couple days and got a bag of hardware for the front portion of the lift. But to my surprise still a problem with the same nut and bolt combo.So long story short I found some nuts from another company got the leveling kit installed. I have so many left over parts I’m not sure what to do with and I haven’t gotten a response from them after I told them this last bag of hardware was also wrong.So maybe not go with this kit… idk.. seems to ride fine but these rounds of back and forth and no real solution from them has really made me uncertain of this company and it’s “quality”.

Made my truck look beautiful and was an easy install at home

Easy setup. If you are handy with tools at all should have no problems putting this on.