Art3d 19.7" x 19.7" (Pack Of 12) Wall Panel Wave, BlueClimatePartner certified

These panels made a huge difference in this space. I get lots of compliments. It's plastic, but from a distance you can't tell. The hard plastic is very good quality. Pops off the like 3D. It's beautiful. I'm a little obsessed and want to add difference styles and color to other rooms. It's extremely easy to put up. In my opinion, it's better than wall paper. The only difficulty is cutting around the outlets. Worth the money and effort.

FYI: I did all of the TLC in the images by myself. I went bold and did the entire bathroom walls, not just an accent wall; using the heavy-duty PVC by Art3D to the walls and the ceilings was done using a softer insulated PE foam brick version also available from numerous sellers on Amazon. (1 of 4 units is completed and fully rented and I have 3 more to go) I'd have to say that you'd need a very strong adhesive such as "Tite Bond" or similar (available at Menards for instance). Your typical liquid nails wouldn't do, as you need something strong enough that would quickly set and create a strong enough bond for the tiles not to fall off.CUTTING: With respect to cutting the tough PVC tiles, I found that cutting from the back-side using my Milwaukee Hackzhall (basically a powerful light-weight portable sawzhall that can easily be controlled one-handed) along with a special universal DIAMOND-BLADE, which can be purchased at your local hard-ware store, did the trick. This blade with diamond bits/chips on the edge, along with the hackzhall, cut through the PVC like sword through butter and allowed me to make some critical/difficult cuts. To further trim the PVC, I used very sharp/new shears to trim to size. Concerning cutting-out for the outlets, etc., I flip the tile and use a sharp razor, but be very careful as the PVC is slick and you could slip or accidentally make the wrong cut; so you could also use a touch metal ruler to prevent/minimize slips of the razor. In my case, I like to recycle stuff, so I used remnants of the metal security door/bar that came from the top of the metal gate that was not used as a hard metal ruler. Remember, easy does it and safety comes first...The application is not too bad on a very flush/leveled wall. If your wall has uneven areas, be prepared to have to use weights of sorts to lean against it. This will delay installation as you may have to do this for every few tiles, or for a trouble section. I have had to use ladders and scaffolding in order to apply heavy weighs such as cinder bricks, clay bricks, and actual weights such as dumbbells and barbells as high as 7-8 ft off the ground to hold the tiles down just long enough to cure (dangerous, so not recommended, but as a Construction Tech, I know my limits and I always have my hard hat on...).The end results are stunning... Especially if you take the time to CAULK between the seams (this is an important extra step that separates the PROS from the mediocre). This hides the seams a lot better and creates a nice continuous seamless brick wall, and makes it all look more realistic. I have gotten nothing but positive review/feedback from all who saw the brick wall.I also did the utility room with the water lines for the electric hot water tank, the furnace, etc.., in the same 3D wall tiles and it looks stunning... Yes, the utility room was a bit of an overkill as the mechanicals will fill-up this room eventually, so you would not see much of the 3D wall, maybe a third of the wall would show if that. However, I personally wanted a challenge, and I wanted a permanent solution to the utility room often needing to be repainted after a few years. This is a more permanent maintenance-free solution, just as with the bathroom, as the wall-to-wall and ceiling tiling (who does that lol?), would offer air-tight, water-proof, low maintenance, easy clean-up look for many years to come, thus saving $$$ in the long run. I am sold on this product and I also purchased their 3D back-splash and would be reviewing before and after on that too. That was also a hit. I will return to buy a ton as I am now focusing my life-long dream/goal of TLC of real estate properties.

This tile product is so cool and durable.. I used it in a bathroom… but I painted it first with outdoor water proof paint.. the colors pop so well with the spaces I left white.. my client did not want me to this design for anyone else .. so she did not allow me to do a photo unfortunately .. but she did say it was simply “Gorgeous “. Definitely using this product in other patterns.. the options are great as well.. the price was reasonable and easy to apply with mastic. I used 2 full tubes and painters tape. I let it dry over night and added pvc trim on the sides and crown molding for the top.. so impressed with this product!

The media could not be loaded. I saw multiple videos that said they could be cut with scissors. I watched them cut with scissors but it was not that easy. The tile is PVC pipe strong and regular scissors did not work. You must invest in “construction scissors” or u will be using a box razor like u see me in this video struggling with. Also once u cut them the edge will show so if you have an open wall like mine, it doesn’t look the best. You can only connect them on the flat edge side that is NOT cut. They can not be interlocked or overlapped so make sure u have a corner or the end of the wall to hide the cut edges. If you have an open middle wall like mine that you want completely covered be mindful it will look like this. Hoping someone can tell me a way I can cover this but until then I will just let it be what it is. Overall I absolutely love the way it looks. Definitely gives a pop as an accent wall as soon a guest walk in my house. Would definitely recommend n do it again.SN: I did skim coat the wall before I glued the tiles to the wall with construction adhesive because my wall was textured and not a flat surface. I wanted to make sure they adhered well to the wall.

The panels look nice and are easy to install. I didn’t want to glue them to my drywall so I taped them to strip boards that I nailed to the wall. I used double sided tape.

These are not as sturdy as they look and you have to be very cautious if one needs to be cut to fit at a certain angle on the wall. They crack depending on where you places the nails to apply them to the wall.

I really like the tile! Looks very cool with the 3D waves when put together. I thought it would go really well in my condo considering I live along the beach here in South Tx. This tile didn’t come with any adhesive so you need to shop for a good one for 3D Art wall tile. When I bought the tile, the color that it was showing appeared to be a lighter, medium blue color, which I thought would be perfect because it would not be too dark or too light. When it arrived, I found it was actually a very, very dark blue almost black blue. The color is not even close to what you see here. I thought I would try it anyway so I put up one row and had to stop. It was so dark you could hardly see the waves in the tile in normal light. Luckily, they are easy to paint. So now I’m shopping for a lighter blue colored paint similar to what was advertised which will cost more money and more time which I’m sure will all work out in the long run. Just be aware that not everything you see that’s advertised is the exact color it appears when it comes to any type of tiles, rugs, certain art, etc.As far as the tile itself, I really think it’s cool and I like it a lot and of course can and will be changed to a better color when finished and look awesome!!

Finally found the perfect thing to hide the ugly back of my wardrobe. Very easy application with a husband, an x-acto knife and “No More Nails” glue

Tres beau, pas Cher et facile à installer. moi je l’ai installé avec tape 3M, très facile.

La pared luce increíble

Used heavy duty contact cement to stick them to the wall, some tiles were lightly damaged while cutting them due to the cold weather despite using a heat gun to balance the temperature. We spent a lot of time cleaning tiles from contact cement that dripped onto the faces and it was a pain to remove. We used an ethanol water dish soap mixture, a cotton pad and a lot of effort to remove it but it turned out really well.

la verdad es que es sencillo colocarlo cuando lo pones en una pared de tablaroca, pero en una pared de concreto es un poco mas dificil, yo utilice no mas clavos y funciono bien, pero para tablaroca con cinta doble cara lo haces bien, igual me toco hacer cortes yo los hice con una dremel y me quedo bastante bien, no probe otras maneras de corte.