TGM Skateboards 2 Scooter Wheels with ABEC 7 Bearings for Razor Scooter 100mm

These wheels worked perfectly to replace the cheap molded plastic wheels on my HF porta-power case. I cut and bent a piece of 16 gauge steel in my press brake to the fit the bottom corner of the plastic case. I welded 1/8" thick steel plate to both ends of the plate and drilled 21/64 holes in them to act as "bearing" for the axle. The plate is secured to the case with twenty 1/8" aluminum pop rivets. The wheels fit perfectly on the original axle. This is a 10 ton porta-power and is quite heavy with all the attachments. Now that the wheels are replaced, I can pull it instead of carrying it.

Happy Camper. Slick profile, fits 5/16" bolt shaft, sealed bearings. A few tiny air bubbles inside, no problem. I have a Toro PowerCurve snow thrower, and the OEM wheels are wide, plastic, and treaded. They pack up with snow instantly; NO practicality when out in snow. My New SCOOTER WHEELS have no tread and will not pack with snow; they are narrow enough to cut through packed snow and carry the machine as they should. I replaced the factory axle with two 3" long 5/16" bolts, one for each wheel, joined across the middle with an All-Thread rod and two long coupler nuts. Coated each wheel bearing with a very heavy grease, to help seal against moisture. Done deal.

Affordable replacement wheels that add some style to your scooter. What more could you want? I purchased these to replace the very tired and stock wheels on my Razor Scooter (A) and couldn't be happier. They're smoother, have much less rolling resistance, and the bearings are very slick. This wheel will spin for a very long time if held off the ground.I DID have to slightly modify my scooter to get the front wheel to fit on my scooter. I had to shave down some plastic above the front axle because the wheel was a few millimeters too tall. Not a big deal.The shipping could've been faster. These are shipped from Michigan. I could've driven from my house in NY to Michigan and picked these up in person a few times over before they arrived.

Fit an older Razor perfectly and made the scooter like new. Made sure not to tighten too much and the wheels turn so much better than the old original one's we replaced. The different colors are allowing my kids to "customize" each scooter to their own style. It helped get them off of the video games and outside. That alone makes them wothwhile!!

my daughter needed new wheels for her razr scooter and these were so easy to install it was insane. was so smooth and takes a while for the wheels to set and be round enough but wow do they move. exactly like new again, only complaint is that the colors were limited and not girly enough

The first set of these scooter wheels held up a lot longer than the second. One of the wheels started making grinding noises after about 2 months of use and had very poor performance- clearly the bearings were shot. The second wheel ground down to about ⅓ of it's original size in about 3 months of use. The rider weighs only about 100 lbs-- I expected the wheels to hold up a lot better.

The wheels on my elliptical were pretty worn out, and the same size as these, so I decided to give scooter wheels a try. They've worked very well. The wheels have been installed and gone through literally hundreds of workouts and are still going strong. Plus, they're really quiet. I've been very happy with these.

Bought these to replace a blown track wheel on my norditrac elliptical. They are a little wider than the one that blew out, but it worked. Now I have no excuses. The bearings that came with the wheels do not fit the elliptical axle. I just removed the old bearings and put them into the new wheels and wala. Saved me a boatload. If I could even find the proper wheels they were about $100. I was going to just toss the elliptical. These were inexpensive and work great.