UAC RD 10898KTC A/C Receiver Drier / Desiccant Element Kit, White

Wasn’t able to use because I couldn’t get plug out of condenser but looks ok

thank you

Super bueno

Wast of time and money. The bag is too large in diameter...original much smaller when compared...than the original that came out of the 2008 Ford Edge. The bag itself is not made of the same material as the original which resulted in fraying of the cotton like material. I was finally able to get it installed after 30 minutes, but then there was the cap that seals it up. It wouldn't go all the way up in there, but I vacuumed the system down just to see after getting it tight and it would not hold a vacuum. Then I had to get it out with a pair of vice grips because the large 14mm allen wrench stripped the fitting in the cap. I wound up swapping the o-ring to the old one and cleaning the screen element up and put it back in there. Vacuumed it back down and it held like it's supposed to.

A bit thick. A bit difficult to install without removing the condenser but I was able to do it.

Exelente, aplica a mi Toyota matrix.

Ok

Works as it should. Difficult to get to the holding tube without taking the condenser off but can be done. I tapered the end of a pvc pipe so that the very end would just fit inside the tube opening. I inserted the dessicant inside the pvc pipe then just pushed it through the pvc pipe into the tube with a socket extension. Worked like a charm.