FascinationsMetal Earth One World Trade Center Building 3D Metal Model Kit

This is eighth 3D laser cut model from Metal Works (Metal Marvels) I've purchased.It was the easiest model to assemble so far. If you don't have experience assembling small model I would recommend starting with this particular model. It has few parts and most of them are pretty big sized, so it is really easy to put them together.I would recommend next set of tools to make the process of assembling much smoother:- Needle nose pliers TEKTON 3511 8-Inch Long Nose Pliers- Small flat screwdriver (1/4" Bit) Flat Head Screwdriver - 1/4" Bit - 6" Shaft- Tweezers General Tools 415 Utility Tweezers- Some hard (metal) flat surface to make 90⁰ bendsAlso, sometimes instead of making 90⁰ bends, it is easier to grab a pin with nose pliers and make a twist it is really helpful especially when the party going to be covered.I have attached some pictures, so you can see how the process of assembling looks like.The model does not require any additional hardware or glue to finish. It is made with high quality materials and looks awesome. I really like how it's designed and manufactured. For example, when I was assembling London Bridge I misread the instruction and had to disassemble half of it and then put them back together. I didn't break anything while moving parts front and back - which is a really good sign of quality.I would recommend following every part of the instructions which included with every item. Instructions are very clear and easy to read, and sometimes if you miss-follow them you might need to redo some steps again.In conclusion, I would like to summarize everything I said before: great quality, design, instructions. No additional hardware required, but you might want to use some tools. A little experience required, but recommended for beginner. It is durable enough, so my cat couldn't destroy it :)It is very interesting and nice model. Definitely not a toy, but a great present for 13+ kids who interested in modeling. I will buy more models from this company for sure. Check out other models from this company on Amazon.

First, let me get a disclaimer out:These are not simple sets (none really are). They're not something you can put together in 20 minutes (if you're a beginner) with nothing more than your fingers. You will make mistakes and you will break pieces. You should purchase two sets, at least. You should look up the finished models online for pictures and guides on how to assemble them. You should double-check every single piece and make sure you're bending or shaping them the right way. You should have at least the following tools:Flat pliers (set of two, long and short), flat tweezers, small wire cutters, a variety of pencils and small eyedropper bottles (for shaping rounded pieces), and a magnifying glass with a work light.Review:Very easy set to put together. It's just one metal piece that forms the entire tower, then a top with a few pieces, and a base. If you have experience, you can knock it out in 30 minutes, if you're new to the metal earth sets, this is a good one to start with.

Very disappointed with this product. It looked really cool and easy to put together but that wasn't the case. The pieces broke apart very easily and bended too easily, making it difficult to put together. Most of the pieces broke on me so I eventually gave up.

This is the second metal earth that I purchased for my son. I find that I need to help him with some of it because there is no room for error. He is afraid of bending something too far or too much and then having the tab break off, which happened on a previous one. With no spare parts, they can be a challenge but the finished product is worth it.

This model is a good starting point if you are new to Metal Earth. There are very few models available for OWTC so I would buy this if you appreciate architecture or if you are new to Metal Earth but do not expect this to take you long or surprise you with any challenges.

Very hard to do.very small,you need micro tools to build this.

a very nice model i have done about 5 of these metal earth kits.this one wasnt that hard except i had trouble with the small bottom square pieces becuase i folded around the tower before i put them on.to fix this you can bend the base pieces 90 degrees then place the square pieces on.the model has only 7 pieces so its not complicated at all.it does have nice detail on the finished model.so even if you just want to try one of these kits out to see if you like them this would be a good one to start with and if you just enjoy these model kits then this one does look very nice

This is an excellent beginner kit to this type of model. I have built a couple of these metal earth kits so far and I can't imagine it getting easier than this. The main body is all one piece and it is a good introduction to the types of bending and forming that is necessary in more advanced models. If you want to give these types of models a try, this is the one for you. As for the model itself, it is very nice looking and a decent size. It is not as intricate as other models but it looks like the building.