Minwax Fast Drying Polyurethane Protective Wood Finish, Warm Satin, 1 Quart

I used this on some speakers I built, I had tried rustoleum first and it was kind of horrible. The minwax smoothed out so much better and dried fast as well.I ended up thinning it about 20% with acetone and just used a paper towel to wipe on thin coats after a few coats I hit it with a 800 grit scuff pad and added then wiped on a few more coats. Very smooth finish that looks great, the simplest thing I have ever done for a top/clear coat.I also have used the gloss and its great as well, I would recommend using the gloss on your first few coats as it is a little more clear and will make the wood grain pop more then use a scuff pad 800-1000 grit go with the wood grain gently, and apply your finally few coats of Satin.Satin is a little cloudy so if you add to many coats it will sort make the wood grain stand out less or have less of that holographic look as the light hits it still an amazing product overall and is what I will be using from now on.

I have been working and finishing wood for 45 years. While I do use a variety of finishing regimens depending on the project, Minwax poly just works for anything whether it's high end or not.The product arrived fast and in great condition ready to use. Never disappoints.

First a little background:For years, Behlen's Rockhard Tabletop Varnish was my go-to for bartops. It went on beautifully, dried hard as a rock in no time, and sanded nicely between coats. The resulting finish was completely bulletproof. It resisted all kinds of dings and dents and could be wiped down with Windex.Behlen's recently became part of Mohawk (maybe they always were; I don't know), but the Mohawk version is not the same product, not even close. On my latest project it never dried hard, so I scrubbed it off with mineral spirits. I tried an even thinner coat, using a paper towel, on another part of the project. The can says four hours to dust proof and fourteen to recoat. After twenty-four hours it was still tacky. My shop is warm and dry. Maybe it would have eventually dried. Who knows? But no varnish, no matter how good it's supposed to be, should be that unpredictable.So I ordered some Minwax oil-based poly from Amazon. I've been using Minwax water-based poly for a while and I've always been pleased with the results. Yes, Minwax products have a reputation as 'consumer-grade' finishes intended for 'amateurs,' but I find they are very reliable and predictable. It turns out oil-based poly is, too. I applied three coats with a soft brush and a steady hand (I have a spray setup but no booth, so I avoid spraying oil-based products because of the sticky overspray). It dries fast, smooth, and dust-free; it sanded well between coats; it looks warm and inviting, and it has no visible brush marks.Bottom line: I highly recommend Minwax fast-drying oil-based satin poly.

Easy to apply and turned out beautifully . After apply no problems with any water marks . Now it ‘s maintenance free !!! Just love it .

For the price this is great poly. I thinned by 20% and was able to wipe on brand new oak doors. Let dry , sand with 220, use sticky cloth to wipe clean and repair 3 + times until you have your desired finish. Expect MAJOR color change if this is going on light wood like white oak. It's Amber when done.

Compared to other products, this one was the best for my wooden floors. Will buy two more to use for the future!

I have been a Cabinet Maker for 40 years. I have tried everything you can imagine from lacquers, Shellacs, & varnishes. Solvent based and water based. This is by far the best oil based varnish ever made. Most varnishes dry to the touch in 3-4 hours and can recoated in 12- 24 hours. This one dries to the touch in 30 minutes and can be recoated in 3-4 hours. It is the most scratch and wear resistant varnish I have ever used. Minwax says that it can be used for floors. I have used it on floors and it has held up remarkably well. Most varnishes and poly's are not recommended for floors. This varnish adds a lite brownish yellow tone to the wood. Most varnishes I have used add a much darker honey tone to the wood. Price wise, for some reason, this is one of the least expensive varnish I have come across. One other thing if the varnish gets scratched, or water damaged it can be lite sanded and recoated and will look like new.

This item was fantastic! The shipper ensured timely delivery, and it arrived even before I anticipated. This unexpected early delivery allowed me to complete my apartment renovation ahead of schedule.