Bennett Marine Bennett HYDBOLTCON Hydraulic to Bolt Electric Conversion Kit, Large
Thumbnail 1Thumbnail 2

Bennett Marine Bennett HYDBOLTCON Hydraulic to Bolt Electric Conversion Kit, Large

4.0/5
Product ID: 27563131
Secure Transaction

Details

  • Operation Mode
    ON-OFF
  • Current Rating
    4.7 Nanoamps
  • Operating Voltage
    3 Volts
  • Contact Type
    Normally Open
  • Connector Type
    Plug In
  • Brand
    Bennett Marine
4.7 Nanoamps
🔌Plug 'n Play
🛠️No drilling required

Description

⚓ Upgrade Your Ride: Transform Your Marine Experience!

  • COMPACT DESIGN - Designed to fit perfectly in your marine setup with dimensions of 15 x 8 x 7 inches.
  • SMART DIAGNOSTICS - Stay ahead with the Auto Tab Retraction and Diagnostics Relay Module for optimal performance.
  • SEAMLESS TRANSITION - Effortlessly convert your hydraulic system to electric without the hassle of rewiring.
  • VERSATILE COMPATIBILITY - Works seamlessly with existing Bennett hydraulic systems and rocker switches.
  • USER FRIENDLY INSTALLATION - Enjoy a quick setup with no drilling or new holes needed—just plug and play!

The Bennett Marine HYDBOLTCON Hydraulic to Bolt Electric Conversion Kit allows for a quick and easy transition from hydraulic to electric systems, utilizing existing wiring and rocker switches. With no need for drilling or rewiring, this kit features a plug 'n play connection and includes advanced diagnostics for enhanced functionality.

Specifications

Operation ModeON-OFF
Current Rating4.7 Nanoamps
Operating Voltage3 Volts
Contact TypeNormally Open
Connector TypePlug In
BrandBennett Marine
Switch TypeRocker
MaterialPlastic
Item dimensions L x W x H15 x 8 x 7 inches
Control MethodTouch
Connectivity ProtocolX-10
ColorMulticoloured
Unit Count1.0 Count
Number of Items1
Item Package Dimensions L x W x H15.2 x 7.48 x 6.38 inches
Package Weight4.52 Kilograms
Item Dimensions LxWxH15 x 8 x 7 inches
Item Weight9 Pounds
Brand NameBennett Marine
Warranty DescriptionWarranty
Model NameHYDBOLTCON
Suggested Usersunisex-adult
ManufacturerBennett Marine
Part NumberHYDBOLTCON
StyleModern
Included ComponentsBennett Marine Bennett HYDBOLTCON Hydraulic to BOLT Electric Conversion Kit, Large
SizeLarge

Have a Question? See What Others Asked

What is the closed lenth?
Actuators are alot larger than my existing Bennett hydraulic actuators are we sure it replaces all types of trim tabs are there diffrent sizes?
Will this conversion if a 18x9 trim tab
Will this plug-in to a led indicator switch or do i need a kit

Reviews

4.0

All from verified purchases

B**R

Plug and Play

I have an older 1997 Carver 260SE and the old Bennet system was leaking bad. I thought that I can fix it, but every season it got worse. I finally broke down and, originally was going to use Lenco conversion. That was considerably more money. I got the HYDBOLTCON last Friday and literally had it installed on just a few hours. Spent more time cleaning the mess from the old system. My wife and I are optimistic about plug and play stuff, but this worked out perfectly. I did not use the purple wire to have the tabs retract when the ignition is off, but it was a nice option. The main controller mounting lined up perfectly with the old holes from the hydraulic system. For us we did not have to drill a single hole. You will need to download the instruction, or use your phone. My 10 year old could have installed this. Great job Bennet! Thank you

R**O

High Quality. These are perfect. They work perfect, Super easy to install!

Super easy to install. i deleted my old controller all together. made more room in my bilge area. its CLEAN no more oil mess to deal with. this is the only way to go. I have been boating for 30 years and thirty years of my former Bennett hydraulic units. love Bennett products just couldn't deal with the oil mess any longer.

A**R

Wrong parts

I have been going back and forth with Bennett for over a year and a half. Bad controller, bad actuator, on forth switch. I have told them from the first failure they sent parts from two different systems, they kept insisting no. Keep in mind I am a master electrician and understand circuitry. Finally. in March the head tech acknowledged that I had incorrect parts and the system was frying parts. They emailed they would be sending me a new system, the correct system and parts. Almost July and no parts, stopped answering emails, another frustrating boating season where I keep spending money hot wiring the tabs until they burn up. Completely unprofessional. I had to send them my history of emails along with history of parts they replaced that I had to remove, return, re install. I am totally fed up! Now with the COVID they don't even answer the phone but give and email address to send a message to....They do not respond! I went with Bennett over Lenco on reputation. Big mistake!

B**N

This is Not A Direct Replacement

This is not a direct replacement for the hydraulic trim tabs. They are much longer than the original hydraulic trim tabs.

J**I

Great kit

Great conversion kit. Only took a couple hours to install

G**W

Good kit but errors in instructions

I bought this kit to upgrade another company's automatic trim tabs on my boat to powered tabs. It worked well. I had to drill new holes in the old stainless steel 11x9 tabs. Instead of following the directions to route the cable through the transom in the middle of the upper mount, I chose to run the cable higher on the transom to keep it above the waterline. I used a hull pass-through fitting for those. I also bought a Bennett BRC4000 switch assembly for the dash. Since I was not converting from an existing system, I cut off the 4-pin connector on the module cable and spliced the wires to a 4-wire extension cable to go to the switch. The switch had to be modified by removing all jumpers and wires and starting over with new jumpers and the wires from the extension cable. See the attached sketch.The module works this way, each of the 4 inputs (port,starboard,up, down) are activated when 12vdc is applied to each one from the switch. A minimum of two inputs must be activated for any operation to occur, one for the side (port or starboard) and one for the direction (up or down). Both port and starboard can be active at the same time (port, starboard, and up for example) by putting 12v to 3 of the 4 inputs.There are two errors in the installation manual. One has you populating only 2 of the 3 mounting holes on the upper actuator mount, even though there are 3 screws supplied. The other error is that the instructions state that the power LED at the bottom of the module will be lit whenever there is power applied to the module. That is not true; the LED is on only when the actuators are being driven up or down.The self retraction feature works well except that it overdrives the motors far longer than necessary.This kit is actually less expensive than buying just the two actuators by themselves, so if you need the actuators, buy this kit. The self retracting relay module would normally cost another $50 at least. So this is a bargain compared to the prices of the individual parts.

V**E

Replaced the old hydraulic system perfectly.

Just had to run the ignition wire and I was good to go. And purchase a new switch.

N**.

Really good

Easy to install and work great for my Sundancer260

Common Questions

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Ravi S.

I loved the variety of products available. Will definitely shop again.

2 months ago

Fatima A.

Best international shipping I've ever tried. Worth every penny!

3 days ago

Shop Global, Save with Desertcart
Value for Money
Competitive prices on a vast range of products
Shop Globally
Serving millions of shoppers across more than 100 countries
Enhanced Protection
Trusted payment options loved by worldwide shoppers
Customer Assurance
Trusted payment options loved by worldwide shoppers.
Desertcart App
Shop on the go, anytime, anywhere.
€ 950.64

Duties & taxes incl.

French Guianastore
1
Free Shipping

with PRO Membership

Free Returns

30 daysfor PRO membership users

15 dayswithout membership

Secure Transaction

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Rajesh P.

Customer service was outstanding when I had questions about the product.

2 days ago

Suresh K.

Very impressed with the quality and fast delivery. Will shop here again.

4 days ago

Bennett Marine Bennett Hydboltcon Hydraulic To Bolt Electric Conversion Kit | Desertcart French Guiana