J-B WeldJ-B Weld 50139 Plastic Bonder Body Panel Adhesive and Gap Filler Syringe - Black - 25 ml
Thumbnail 1Thumbnail 2Thumbnail 3Thumbnail 4Thumbnail 5Thumbnail 6Thumbnail 7

J-B WeldJ-B Weld 50139 Plastic Bonder Body Panel Adhesive and Gap Filler Syringe - Black - 25 ml

4.6/5
Product ID: 32648296
Secure Transaction

Details

  • Brand
    J-B Weld
  • Specific Uses For Product
    Tile Repair
  • Material
    Resin
  • Compatible Material
    Cement
  • Item Form
    Liquid
⏱️Sets in 15 Minutes
⚙️Tensile Strength: 3770 PSI
🌧️Water Resistant

Description

🔧 Bond with Confidence: The Ultimate Repair Solution!

  • UNMATCHED STRENGTH - Achieve a permanent bond with an impressive tensile strength of 3770 PSI.
  • QUICK SET INNOVATION - Experience a rapid 15-minute set time for your projects.
  • USER FRIENDLY DESIGN - 1:1 mixing ratio ensures hassle-free application every time.
  • INDOOR OUTDOOR READY - Durable and dependable for all your repair needs, rain or shine.
  • VERSATILE APPLICATIONS - Perfect for a variety of materials including plastics, composites, and metals.

The J-B Weld 50139 Plastic Bonder is a quick-setting, two-part urethane adhesive system designed for strong, lasting repairs on a wide range of materials including thermoplastics, composites, and coated metals. With a 1:1 mixing ratio, it sets in just 15 minutes and cures to a hard, permanent bond, making it ideal for both indoor and outdoor applications.

Specifications

BrandJ-B Weld
Specific Uses For ProductTile Repair, Woodworking, Carpentry, Repair, Flooring, Masonry, Countertop, Wall Repair
MaterialResin
Compatible MaterialCement
Item FormLiquid
Special FeatureStrong
ColorBlack
Item Package Quantity1
Package InformationSyringe
Item Volume25 Milliliters
Full Cure Time30 Minutes
Water Resistance LevelWater Resistant
Tensile Strength3770 PSI
UPC043425501394
Number of Pieces1
Global Trade Identification Number00434255013940, 00043425501394
ManufacturerJBWeld
ModelJ-B Weld 50139 Plastic Bonder Body Panel Adhesive and Gap Filler Syringe - Dries Black - 25 ml
Item Weight2.11 ounces
Product Dimensions1.57 x 1.18 x 7.28 inches
Country of OriginUSA
Item model number50139
Is Discontinued By ManufacturerNo
Manufacturer Part Number50139
Special FeaturesStrong

Have a Question? See What Others Asked

is this product ok for a gas can seam that is bad. or will the gas eat it away ??
does is repair a very thin crack from the sun on dashboards?
Would this product work for gluing a plastic speaker cover back onto a rear plastic door panel?
I need a extremely extremely strong glue to bind a plastic tracker to a metal tool! is this or what would be good!?!

Reviews

4.6

All from verified purchases

T**B

Feels like hard plastic.

I was replacing windshield wiper refills and one of the plastic covers cracked in a few pieces. Since it was just the cover part and the wiper still worked fine and i still have a bunch or blade refills i decided to try and fix the cracked cover. I bought this 2 part epoxy since its black in color and its outdoor use.It mixes up easy but it gets everywhere. I was wearing disposable gloves thankfully or my hands would have been covered. I was working with small broken pieces so just couldnt avoid not touching the epoxy.It sets up pretty fast. The mixed epoxy seems to start setting up right after mixing. It gets hot too. I only mixed a small amount each time to have longer to work with it.Seems to cure solid. Sticks to everything. I used a little too much and had trouble fitting the wiper back on the arm so had to sand some down. It sanded easily with a metal file. Hopefully it lasts along time and doesnt break down in the sun. I'll update if theres any issues with it.

M**L

easy to use. dries quick. still holding!

I bought this to repair a plastic shed door that got ripped out by the wind. I had to actually glue the hinge itself back on. It worked great. (stuck to my fingers a little bit!) It dries quickly. I didn't notice a smell, but I used it outside.It bonded great. Dried hard. EASY to use.The hinge is still working, the door still swinging and I didn't have to throw out a small $100 plastic shed.Definitely will use again.

A**R

It works!

This product worked great! We had a separation between the bumper plastic and the wheel well that we were about to spend thousands of dollars on to fix. Did some research and found this external car glue and it was worth a try for under $10!We used the glue and tried to hold it for 8 minutes or so (instructions say 6 minutes) and it unglued immediately. We decided to try a wood clamp and walked away for 30 minutes and, lo and behold, it worked! It glued so tight that we went on a 2000+ mile road trip a few days later and it withstood the wind and heavy rain.I wouldn’t say it was as quick to dry as expected, but definitely did its job! I would absolutely recommend this and will use it again, if necessary! Pretty sure this is what body shops use and will charge thousands. Totally worth the money!

D**N

Works well for most plastics.

I have used Plastic Bonder on many projects over many years. When it works it is wonderful, when it does not it is typically easy to clean up and remove from the item so you can try a different solution.Pros:• Works on most plastics, and most materials I have tried to attach plastic to.Cons:• Doesn't always come out of the syringe in equal parts. This usually is only an issue with newer syringes but tapping the syringe several times seems to help release any air pockets inside that cause the issue.• Plastic Bonder is not compatible with Polypropylene (PP) or Polyethylene (PE) and their support recommends using MMA500 for Polypropylene. I have used Plastic Bonder with Polypropylene and it works for some fixes depending on the requirements. It only hardens to what can best be described as a stiff bendiness that breaks or separates if there is too much flexing or pressure, but it does not harm the PP plastic and is easy to clean up and remove from PP if needed.• Little documentation on specific materials that Plastic Bonder or any other JB-Weld is compatible with. Though they do respond to questions sent through the contact form on their website (jbweld.com) within a day or so.Tips:• Wear gloves. Though not listed, it sticks to skin quite well and is difficult to remove if left on your fingers for any amount of time. Alcohol, or acetone can help if it has only been a few minutes.• Have paper towels ready before you start applying. If Plastic Bonder gets on anything accadently, you need to quickly wipe it off.• Protect your work surface. This stuff is almost magical in its ability to get on everything in the immediate area.• For small items I have found the following useful:> Use painters' tape to hold the item together while curing. The tape usually releases relatively easily after a few hours and helps keep everything in place.> Using tinfoil as a drying surface works well. After about an hour of curing I gently twist the item to prevent the tinfoil from permanently bonding to the item I am working on. After an hour of curing Plastic Bonder usually has firmed up and enough to tolerate gentle movement of the item, while still being soft enough to easily release from the tinfoil.> Toothpicks make good disposable applicators and cut up business cards are handy for shaping Plastic Bonder when applying to small items.Overall, I do recommend JB-Weld Plastic Bonder. I do wish it were offered in other packaging as the syringe works for medium sized repairs, but for larger repairs the syringe does not last very long, and for smaller repairs a lot of Plastic Bonder goes to waste as it is difficult to eject small quantities of Plastic Bonder in equal parts from the syringe.

R**.

Very effective

Super strong. Dark gray when mixed. If you require the adhesive to have a very thin film thickness I would try something else. Also, clean up any excess immediately as it will leave a stain.

D**B

well made and works perfectly

Very strong and works well. Low smell and dries quickly.

J**S

Works like a charm!

Seeing this was used for autobody repair, I had nothing to loose! Long story short, I went through the car wash and had my gas door open. The car wash won! It was tricky but I got the arm of the door bonded back on! And it's been working just fine. Great product!

N**R

Great stuff just great stuff

Very very solid adhesive, regularly use for computer repairs and just... Lots xD

Common Questions

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Suresh K.

Very impressed with the quality and fast delivery. Will shop here again.

4 days ago

Abdullah B.

Great price for an authentic product. Fast international shipping too!

3 weeks ago

Shop Global, Save with Desertcart
Value for Money
Competitive prices on a vast range of products
Shop Globally
Serving millions of shoppers across more than 100 countries
Enhanced Protection
Trusted payment options loved by worldwide shoppers
Customer Assurance
Trusted payment options loved by worldwide shoppers.
Desertcart App
Shop on the go, anytime, anywhere.
€ 38.10

Duties & taxes incl.

French Guianastore
1
Free Shipping

with PRO Membership

Free Returns

30 daysfor PRO membership users

15 dayswithout membership

Secure Transaction

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Ravi S.

I loved the variety of products available. Will definitely shop again.

2 months ago

Rajesh P.

Customer service was outstanding when I had questions about the product.

2 days ago

J B Weldj B Weld 50139 Plastic Bonder Body Panel | Desertcart French Guiana