CS2065A 2 to 3 HP Replacement Air Compressor Pump Single Stage Two Cylinder 7 CFM
Thumbnail 1Thumbnail 2Thumbnail 3Thumbnail 4Thumbnail 5Thumbnail 6

CS2065A 2 to 3 HP Replacement Air Compressor Pump Single Stage Two Cylinder 7 CFM

4.8/5
Product ID: 506250535
Secure Transaction
2-3 HP Power
💨7 CFM Flow
🔧Portable Design
Frequently Bought Together

Description

🚀 Elevate Your Air Game with Unmatched Power!

  • BUILT TO LAST - Constructed from durable cast iron for longevity and reliability.
  • EASY MAINTENANCE - Equipped with a sight glass for effortless oil level monitoring.
  • EFFICIENT AIRFLOW - Delivering a remarkable 7 CFM at 1180 RPM for optimal efficiency.
  • UNLEASH THE POWER - Experience robust 2-3 HP performance for all your air compression needs.
  • VERSATILE VOLTAGE - Compatible with both 110V and 220V motors for ultimate flexibility.

The 2-3 HP Replacement Air Compressor Pump is a high-performance, single-stage pump designed for compressors under 40 gallons. With a robust 7 CFM airflow at 1180 RPM and compatibility with both 110V and 220V motors, this durable cast iron pump is perfect for professionals seeking reliability and efficiency in their air compression tasks.

Specifications

BrandCompressor Source
Voltage110 Volts
Recommended Uses For Productpulley
Power Sourcegas
Included ComponentsFilters
Item Weight37 Pounds
Maximum Power2 Horsepower
Capacity40 Gallons
ColorBlack
MaterialIron
StylePortable
Air Flow Capacity7 Cubic Feet Per Minute
Motor Horsepower2 Horsepower
ManufacturerCompressor Source
Part NumberCS2065A
Item Weight37 pounds
Item model numberCS2065A

Reviews

4.8

All from verified purchases

S**.

Huge Improvmemt

So I have a 30gallon upright compressor I bought at Lowe’s in 2009 . I started a repair business and used this compressor commercially for 4 years , it ran almost constantly. Then I used it at home but I wouldn’t call it typical home use . It was always running , painting , grinding , it ran a hour a day minimum when at home. So it was worn out , started making extra noise and taking longer and longer to reach pressure . It was time to replace the pump .Other reviews mentioned that this was a direct replacement to the Lowe’s 30 gallon compressor pump , and it mostly is .my old pump has a 3/8 outlet and the new pump has a 1/2 outlet . So I just removed the fitting from the old pump and installed it on this one and it worked fine . I would guess I sacrificed some air flow and increased filling time and CFM output , but it’s still a massive improvement . In the future I will be looking into changing the tank to a 1/2 line to get the benefit of the CFM improvement that this pump is advertised to have . ( old 5.5 CFM , new 7CFM . )Before I removed the old pump I drained the tank and removed the air lines to get a baseline empty - full ( and I set mine to 155 PSI to shut off ) . It took a total of 17 minutes for the old pump to reach 155 psi . Noise level was 115 DB at the air filters and 95DB feet away . The new pump wow was a huge improvement . It took 5 minutes to fill and was much quieter, 95 DB at the filter and 85 5 feet away . And it’s a much lower, less annoying noise . All and all I’m very pleased .I do also have to comment on the packaging . They pack this thing right, it’s so secure in the box it’s unreal . Lots of expanded packing bags , it wouldn’t move . There was oil all over the bag it came with , but there was absolutely no way for this to move inside the box to get damaged. If you have any experience with delivery company’s ( all of them) they are not nice to there packages , they toss and stack them however they need to. But this thing was packed to nicely in the foam it was nearly impossible to move to keep it safe . In fact it was a bit time consuming to cut the foam from behind the flywheel to free up. .They don’t install the filters , but they do install the flywheel . So be prepared to remove the new flywheel to install it on your compressor, because most have the saftey cage around the belt and pulley area . The shaft of the pump goes through the cage so the flywheel must be removed . It’s a tapered fit so , be prepared for that part of the install .The pump is shipped mostly empty of oil , so have some 30w compressor oil ready to fill it to the recommended level . I did almost no maintenance on the original pump ( seriously can not believe it lasted ) but I already found a hour meter to mount on this one to keep up with the usage and maintenance intervals as instructed.I’ll update the review as time goes on if there are any problems or defects that pop up . But it look like the best $150 I have ever spent . Enjoy !!

J**O

Great Replacement

the original one could no compare to this one, had to make a plumbing change with some of the old pipes but worked out just fine. Would buy again the original one from Lowes was 100 bucks more so I made out much better. Works great pumps up much faster the the old one.

M**N

So far, so good.

This compressor arrived just as others have wrote about. 1st, the compressor fluid leaked out and the box was oil soaked in places. 2nd, one of the cooling fins was broke off. I figure this probably happened at the factory because the box was in good condition other than the leaked oil that I already mentioned.But as functionality goes, this compressor bolted up perfectly on my Puma compressor. The pulley was the same so I was able use the existing belt. Even though this pump was slightly bigger than the original pump, the guard still fit without any modifications.So far, so good. The compressor fills the 25 gallon tank with 130 psi in just over 2 minutes. I am very happy with it so far. I would give it 5 stars if it wasn’t for the 2 issues noted above.

B**N

Works perfectly on my Kobalt 30 gallon

I bought this to replace the pump on my 30 gallon Kobalt compressor which started failing 90 days after I bought it. The build up times had increased to 20 minutes to cut off. I knew the valves were shot in the head but could not locate the parts to rebuild so I ordered this pump. It was a direct bolt up and I had it together and running in 20 minutes. Mine runs off a 1.5-hp motor and does so with ease. My original set-up had 160 psi operating pressure so when installing, I adjusted my pressure shut-off valve to 125 psi. From empty to full/shut off, I’m back to 6-minutes. It handles my impact tools and sanders with ease!

Common Questions

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Rajesh P.

Customer service was outstanding when I had questions about the product.

2 days ago

Ali H.

Fast shipping and excellent packaging. The Leatherman tool feels very premium and sturdy.

1 day ago

Shop Global, Save with Desertcart
Value for Money
Competitive prices on a vast range of products
Shop Globally
Serving over 300 million shoppers across more than 200 countries
Enhanced Protection
Trusted payment options loved by worldwide shoppers
Customer Assurance
Trusted payment options loved by worldwide shoppers.
Desertcart App
Shop on the go, anytime, anywhere.
€ 827.22

Duties & taxes incl.

French Guianastore
1
Free Returns

30 daysfor PRO membership users

15 dayswithout membership

Secure Transaction

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Rajesh P.

Customer service was outstanding when I had questions about the product.

2 days ago

Reema J.

Perfect platform for hard-to-find items. Delivery was prompt.

1 month ago

Cs2065a 2 To 3 Hp Replacement Air Compressor Pump Single | Desertcart French Guiana