Astro Pneumatic Tool 930 Air Body Saber Saw with 5pc 24 Teeth per Inch Saw Blades, Black, Silver

Got this for doing some auto restoration work, duh. BUT Wait there's more. Turns out it is really handy when you just need to zip something off like metal-plastic-wood. The uses are endless, anything you need a small saw for this one rocks! Blade has lasted through way more metal sheet trimming than I thought was possible and still was used for cutting some pulleys off of an old junk engine we couldn't get to the bolts, blew threw 3/8" steel like it was butter and this was the proverbial hot knife.I'm really impressed with just how handy it has become for just about anything we need to trim or quickly cut off as long as the blade can span the material it seems to cut it all. Haven't tried it on thick stainless yet but mild steel, aluminum, wood, plastic's all are easy to cut and the tool just seems to run. We do keep it well oiled as with any phenumatic tool.For the price even if it breaks tomorrow I'd buy another one of these, it's that good. But I expect it to last a long time. Quality is very good, fit and finish is very good.Get one you probably won't regret it. And you will probably find 100's of uses for it you didn't think of before you have one.

Saw this tool listed with good reviews and noted that it would be perfect for some projects I have "in the works." Therefore, I had to have one. Nicely made and with 5+1 blades and two hex wrenches included, you need only a hose fitting, a few drops of air tool oil and you are ready to go. The wrenches allow blade changes and blade guard adjustment. As with many air tools, the operating lever is pretty much either off or on. After a few minutes cutting, I was used to it.As to its purpose, there are jobs in which a handsaw is too bulky, clumsy, or cannot start a hole on an inside cut. By the same measure, a jigsaw may not be able to access the cut or the material is too heavily contoured. This mini-Sawzall solves that. I wondered about the 1/4" stroke but the bi-metal blades that are included pretty decent and cut the appropriate material quickly. Curves are easily cut. Sometimes too easily for my hands. The blade flexes and one must watch any precision cut closely and progress slowly. Vehicle exhaust tubing, excess material or other non-precision cuts go very quickly. The exhaust collar may be rotated to direct the air and shavings away from you.The only thing I wanted was a blade guide which would control the side-to-side flex. I pondered for a bit and found that the "straw" from inside an aerosol brake cleaner can fit nicely over the blade guard. With a little hair dryer heat and twisting, the 1" polyethylene straw sections slid into place on the guard, straddling the blade. But their thickness left too much gap. So, I cut two 1" sections of vacuum tubing and slid them over the straws. Now, the blade still has room to flex, but is more controllable as you cut.Overall, a very handy, well-made-in-Taiwan air tool that should last a good long time.

Started to buy the Ingersol Rand 429G low vibration again to replace my broke one, but wanted to try the semi look alike probably normal vibrating Astro version. Ingersoll Rand definitely feels smoother/less vibration on the hands than the Astro. 35-40% more vibration than my old 429G ingersoll file saw. I fabricate signs for big chain stores, banks,gas stations,hotels,etc and this Astro tool has did me well with such jobs trimming corners and fine cutting raised 1” edges lips. 90% of my work is aluminum 1/8”-1/4” thick angle and same thickness in tubing so it works well. To some of the comments about the blades, yes they are not great and dull fast, but good enough for thin small projects. Trying to avoid Amazon denying my review…👉🏻I use either “red brand/red blades” at work since I can get them at discount. Yes the red blade brands will work in this Astro tool. Keeping a film of tool grease on the blades will extend life AND keep aluminum from melting between teeth. Pics above show the tool grease I use and the lip edges (pic is of a 1ft long lip & 1/8” thick). Air file saw allows me knock the lip height down with very little dust so little time is needed on the grinder/sander and avoiding more of a mess to breathe and be covered in. This Astro version works 85% as good as the Ingersoll and has lasted 5 months now with pretty moderate use. I’m liking this tool’s test run so far and would buy again, but still liked my low vibration Ingersoll due to my usage of an air file at my job. If your buying this tool for small jobs or carving shapes for house projects, it’s more than capable of such, or at least the one I purchased is. Don’t over tighten the two side allen screws that hold the blade and just firm them up decent.

Purchased this a few months back, and I've had some time to test it out. I mostly use this for cutting plastic bumper pieces when installing trailer hitches, or other similar applications. I must say, i couldnt ask for better. It does exactly what i need it for, and it does it well. I got curious as to how well, and decided to see if it would could through an exhaust bolt. The bolt was no match. Cut right through it in seconds. The blade wasn't even worn or damaged in the process. I can't say I've tried every air saw out there, and this may look like a pile of crap next to a bigger name brand tool for all i know, but for what i paid for this, im very impressed. Only time will tell if this will hold up in a shop environment. I highly recommend this tool to anyone seeking an air saw at a modest price.

VERY useful little saw and quite powerful, you can use whole or pieces of hacksaw blades in the arbor with no problem, works much better than the correct blades anyway if you buy good blades. Had no problem cutting though sold cast steel, hardened bolts and all in very tight quarters where a standard whiz tool or sawzall wont fit. For the price works just as good as the tool truck expensive brands, some tool trucks even sell astro tools. If you wrench you know, just get this saw if you need a compact saw you can put almost any blade into.