WayPonDEVCM3588 Network Storage Module NAS Kit, 8GB LPDDR4X Single Board Computer, RK3588 2.4GHz CPU 6TOPs NPU Mali-G610 GPU, Support 4X NVMe SSD for Home Cloud Server, 8K Video Encoders (8+64GB)

Nice package; Good and Easy choice fitting Linux PCIe endpoint framework study; 4x NVMe slot works stable at 1x lanes; 1st slot can configured as PCIe endpoints or PCIe RC while the remaining Slot acts as PCIe RC; Nice customer service; Fast shipping; Nothing to complain.

I recently purchased this board to explore a new hobby and experiment with clustering, and so far, I’m really impressed. It arrived quickly, and right out of the box, it’s significantly more powerful than my Raspberry Pi. Performance is smooth, and it’s even more compact than I expected, making it a great fit for my setup.One thing to note is that it does run a little warm, which is to be expected given its performance. If you plan to use it as a NAS that you frequently access, I highly recommend ordering a fan or two to help with cooling. Mine arrived fully assembled, with the command module already attached to the board and a heatsink pre-installed on top of the CPU.The only real challenge I faced was the OS installation, though I suspect that was more of a personal learning curve. The available guides can be a bit convoluted at times, and while the wiki offers some helpful insights, troubleshooting can be difficult due to the lack of community support—there just aren’t many forums discussing this board yet. If you’re new to this, I highly recommend installing the OS via an SD card, as it’s the easiest method. If you choose the USB-C to eMMc route you’ll be dealing with a lot of “extra”.Build quality is solid, and all the ports—HDMI, USB-A, and USB-C—fit snugly. While this ensures a secure connection, it can feel a bit tight at times, making me slightly wary of applying too much force. That said, I see this more as a personal concern rather than a flaw in the design.Overall, this board has exceeded my expectations. Despite the learning curve, it’s a powerful and compact option, and I highly recommend it for those looking to experiment with clusters or build a high-performance NAS.

Got it with Openmediavault pre-installed. It has saved a lot of time for me. Though need to test the data transfer speed across 1 gig network with Gen3 nvme installed.

Fast and capable little board, very power efficient. Debian AARCH64 runs like a dream on this machine, and makes a super performant and reliable experience for every protocol I've used, from plain-old SCP to RSync, NFS, SMB, and AFP.This is also a great little development platform, with NVME you have plenty of high-speed flash for doing direct on-system software development without having to work about endurance of the on-board EMMC storage.I'm excited to make use of the CSI camera connector as well as the GPIO header for direct data capture.Seller has been very helpful with all the questions about the product I've had so far.

Good Item, not just for home use. After certain checking up, I'm thinking of getting another one for additional tasks, as an email server, and more NAS storage. Also, with working out on Linux and VPN services, it is possible to set up access from anywhere without having a static IP from an Internet Service Provider, ISP, and many other solutions, choices if to take the time for research and mind. One solution if to take adapters for PCIE, which makes it possible to connect multiple drives as SATA. Other... Perfect customer service at WayPonDEV store, fast reply with different variants of solutions.

I worked on this on and off for 6 months. The board works great. A little hot with 4 sticks of nvme but within specs. Shipping started off bad, shipping companies fault. Seller stepped right up and took care of it.

I purchase the 16GB CM3588 - at the time it was the only model available. I would eventually like to upgrade to the 32GB model.I am using mine kit as a Network Attached Storage server running Open Media VaultAt the time of purchase there were no cases so I 3D printed one.I am really surprised by the small compact design - and processing power - this unit runs all my docker containers and storage server with ease.

Complete and total waste of money, the TF card slot's cover was missing from the board, making it so I cannot actually insert a TF card. That wouldn't be such a massive a problem if YOU COULD SIMPLY INSTALL THE OS WITH A USB DRIVE! But since you HAVE to use the TF card slot to install the operating system, the entire board was completely un-usable, with such a tiny defect the entire machine was essentially bricked. Unbelievable. It's impossible to set this device up if you can't insert a TF / MicroSD card, and because the device was missing the cover for the TF slot it was impossible to actually set up or use the device at all. Extremely disappointed, wasted a LOT of time on this.