Subaru Genuine Tweeter Kit Kicker WRX STi Forester Crosstrek Impreza H631SFJ101

This is a direct replacement for the factory dash tweeters (non-JBL) for a 2021 Toyota Tacoma. Easy installation. Greatly improved the sound quality just by replacing the tweeters.

This is a super easy way to improve the audio in a Subaru Outback!Unbelievably, the base model didn't come with any tweeters at all, explaining why the audio was nothing but boxy midrange. Easily pop off the covers near the windshield (you'll want a plastic trim removal tool), plug in the speakers (no wiring needed), preferably screw it down, and your sound quality is enormously improved in a few minutes. A subwoofer is also a very worthwhile upgrade to really round out the audio capability, but will take a bit more work.

This has only been in the car for almost a week, but it is a great upgrade from the stock tweeter in a '25 Subaru Crosstrek. This has an actual magnet attached and the detail, separation and clarity is far better than the one it replaced, At $100 dollars it is a bit of a bargain, and should be considered as a base for upgrading the stereo.It is easy to install, excepting for the very tight space for accessing the (2) screws. I improvised a tool and it was no problem after that. The wiring was one simple connector and the job was done as soon as the fasteners were reinstalled.

Direct replacement for my 2020 Toyota 4Runner as also mentioned on other reviews. Yes it is “plug-and-play” - you won’t need anything else to install. Definitely an improvement in sound from stock so “price to upgrade” ratio was good.Some notes on install:1. Plastic, interior trim pry tool recommended. But mine was at my office and I was excited and impatient so I used a butter knife with some tape - no problem.2. Bolts that attach the speaker to the speaker bracket are VERY tight - maybe to ensure they don’t vibrate loose? Easier to remove the entire bracket w/speaker and then work on removing the two speaker bolts. Trust me - otherwise you will bend the bracket. The bracket is thin and is easily bent.3. The weld nuts on the back of the speaker bracket for the speaker bolts are square with rounded corners. And again, these bolts are insanely tight. The spot welds will make it hard to use a standard or adjustable wrench on the weld nuts and the wrenches won’t hold - that’s how tight these bolts were on. It is best to use vise-grip pliers to hold the weld nut as you loosen the speaker bolt from the speaker bracket.Other than the extra time it took me to figure out how to get the super tight bolts out, this was very straightforward. Knowing the best process now, I could do this on someone else’s truck in 10 minutes or less for both speakers. And now you know.

Sound quality was definitely improved! Install was demanding, having to remove plastic pillars, and working around air bags, and small tight spaces. Remember to disconnect your battery before you start install, just to be safe. However, I got it done, and fitment was great. Utilizes factory connectors, and mounting points. Great bolt on, plug in, put back together upgrade. I have had these for 6 months and is still kicking great to this day. Speaker works with all functions with factory Tacoma stereo (Adjusting trebles, bases, all coordinate perfectly with these speakers). Truly plug and play.Great upgrade, but a hefty price tag. If the price was a bit lower, I'd easily have this at a full 5 stars.I would recommend this product to anybody looking to upgrade their sound!

Good speakers, works for 2nd gen tacoma just shave down wire housing to fit

Great improvement compared to stock in a 2016 Subaru Crosstrek Premium. Direct plug and play. Recommend using plastic auto trim removal tools, also need a 90 degree screwdriver adapter or low profile wrench to remove old and install new, easy 15 minute task.Definitely worth it for the price!

Direct plug-and-play for 2015 Legacy. Great upgrade over the paper-cone OE speaker in my Premium trim level.Note: only ONE of the two mounting screws will fit. I found the one screw to be enough to keep the tweeter in place, so I’m OK with that. Just realize, again, that only ONE screw will be holding this down.This thing is likely way more efficiency (sensitive) than the OEM speaker, so highs will sound better, even with the stock head unit. I upgraded to these tweeters along with replacing the door speakers with more-sensitive two-way speakers that seem to match well. I’m not sure how this will sound with the stock speakers. How you like this, as with any speaker, will depend on what you listen to. I find the tweeters have enhanced talk radio (what I listen to 90% of the time) nicely, but I have to adjust the high frequency response down a bit for other music to prevent it from sounding harsh. I’m not upset about this, because I had to adjust the low end of the EQ All the way down to prevent the new door speakers from sounding annoyingly boomy.As with anything, YMMV as your tastes may be different than mine. I’m very pleased and really wanted to post the information I could NOT find, which is that they are electrically plug-and-play (no adapter required), but one of the two mounting screws isn’t even close to lining up....