Rough Country Forged Front Adjustable Track Bar for 2014-2024 Ram 2500-31004

Came packaged very well, shipping took 3 days and it was estimated at 7- very happy with that. The track bar is for a 2016 Ram 3500 SRW, I have not installed yet. Bar came in two pieces and is required to be assembled which is fine, it’s very heavy for just a track bar and I can’t wait to install it after thanksgiving to get rid of the wobble in my front end due to oversized tires and level springs, I added extension sway bar links and still have a wobble, going to do this and a steering box brace and get an alignment and see how she goes, also did radius arm drop brackets so this is the last component to do my level properly. Next is ball joints and tie rods but only have 80k so not doing them unless wobble persists. Point being. If you want to save 200$ over carli I would get this I’d compare the quality to moog products/ far superior to mopar oem! Will update review after install.Update 11-26-2020 installed and fits like a glove, much heavier duty than oem. Hope it helps my issue! Must have if you own a ram 4th gen

I put a 2.5 leveling kit on my 2018 ram 2500 and it pushed the axle off center. Some folks don’t care but I was not having it. This adjustable track bar fixed the problem. It is about half the cost of what others are charging and seems to do the job. I don’t know what I’m missing for twice the price. Easy to install if you are mechanically inclined and have the tools. If you get nervous at the thought of changing a tire or your own oil you should probably seek assistance with this install. Will require adjusting the steering link to recenter the steering wheel and you will have to recenter the axle (which is the point of this product).

2019 Ram 3500, install was easy, it is very beefy, I love that you can adjust the track bar without removing it from the truck. I have done the Carli track bar in the past and I like this one better, and the price is way better.

If you lift or level your truck, this is necessary. Great price, too.

The install was super easy as expected. After having it on my truck the bushing on the frame is blown out. I torqued everything to spec and followed the instructions to a t (even though it is super easy). Now I have to replace this again but will be upgrading.

Very heavy duty, so far so good.... no more death wobble in my 2014 ram 2500 Cummins

Less than 6 months and 12,000 miles and the upper bushing is shot. I'm starting to get a little death wobble and yes it was installed correctly not much to it and torqued to spec at ride height.

Rough country has never let me down. Installed on my ‘14 Ram 3500 4x4, 6.7 Cummins. Great product, very heavy duty, little difficult to get axle centered in my driveway. Has lots of adjustability. But got rid of the vibration I was having.